3810 N Tulsa Ave c1, Oklahoma City, OK Mon-Sun: 7:00 am – 7:00 pm
(405) 442-9071
Oklahoma City Siding Company logo
(405) 442-9071 Free Estimate
Licensed & Insured

Siding Contractor in Oklahoma City, OK Built for Hail, Wind and 100° Summers

Siding in Oklahoma City takes more abuse than siding almost anywhere else in the country. Spring hailstones punch holes in vinyl. Straight-line winds over 60 mph tear panels off gables. Summer weeks over 100°F warp anything that was nailed too tight, and red clay soil pulls seams and trim out of line as the foundation shifts. Oklahoma City Siding Company repairs, replaces and installs siding with all of that in mind. We use the right materials, fasten to the manufacturer's wind ratings, and flash every brick-to-siding transition so wind-driven rain can't get behind your walls.

We're a local team, not a crew that rolled in behind the last hailstorm. We work on 1920s bungalows in Mesta Park, postwar ranches in Del City and Midwest City, and newer brick-and-Hardie homes in Edmond and Moore. We know which suburbs want a permit, which HOAs restrict colors, and when a historic overlay needs a Certificate of Appropriateness. Whether you need one storm-damaged gable fixed or a full fiber cement re-side, you'll get straight answers and a written estimate.

  • Bonded and insured
  • Free, written siding estimates
  • Financing available
Schedule Free Siding Inspection Hail or Wind Damage? Start Here (405) 442-9071

Our customers across the metro value clear communication, clean job sites and siding that holds up when the next spring storm comes through. Ask us for local references during your free estimate.

Request Your Free Estimate

No obligation. Fast, honest quotes.

Your information is never shared.

Online Estimates
Onsite Service
Licensed & Insured
Customer Rated
Local Expertise

Why Oklahoma City Homes Need Siding Built for Local Conditions

Siding that does fine in a mild climate can fail within a few seasons in central Oklahoma. Hail, tornado-force wind, big temperature swings, shifting clay soil and a mix of housing from many eras all affect what lasts here. So do the local permit and historic rules.

Tornado Alley Weather: Hail, Wind and Heat

Oklahoma City sits in the middle of Tornado Alley and ranks among the most hail-prone metros in the U.S. From April through June, storms regularly drop hail 1 to 2+ inches across. That's big enough to crack vinyl, dent aluminum and steel, and chip fiber cement finishes. Straight-line winds of 60–80+ mph peel off panels and rip soffit and fascia loose. The 1999 and 2013 Moore tornadoes showed what flying debris does to wall cladding. Summer highs stay in the upper 90s to 100s for weeks at a time, and winter brings ice storms and fast freeze-thaw cycles. All that expansion and contraction makes vinyl buckle and oil-can. About 36 inches of rain a year, much of it wind-driven, tests every J-channel and flashing detail. High UV and steady south winds fade and chalk west- and south-facing walls the fastest.

Brick Ranches, Bungalows and Every Era in Between

Most metro homes are single-family ranches with brick veneer, with siding on the gables, upper stories, soffit and fascia. That makes partial-wall work and brick-to-siding transitions a big share of every job. Core neighborhoods like Heritage Hills, Crown Heights and the Paseo date to the 1910s–1940s and have original wood lap, cedar shingle and stucco, sometimes buried under aluminum or asbestos-cement shingle. Postwar Capitol Hill, Del City, Midwest City and Warr Acres mix asbestos shingle, aging aluminum and 1970s–80s Masonite. Tract homes from the 1970s–1990s in Edmond, Moore and Norman often have failing hardboard or LP OSB lap siding. Newer subdivisions mostly use James Hardie fiber cement or vinyl. Thousands of Moore homes were rebuilt after the tornadoes, so you'll find new cladding right next door to 50-year-old siding.

Permits, Historic Overlays and HOA Rules

Oklahoma City Development Services issues residential permits. A simple re-side may not need one, but replacing sheathing or framing, changing openings, or doing commercial work usually does. Edmond, Moore, Norman, Midwest City, Del City, Bethany, Warr Acres and The Village each run their own building departments with their own rules. The state adopts the International Residential Code, which covers the water-resistive barrier, flashing and wind-rated fastening. Heritage Hills, Mesta Park, Crown Heights, Jefferson Park, Paseo, Shepherd and Edgemere Park are HP/HL historic districts that require a Certificate of Appropriateness. Swapping wood for vinyl there is usually denied. Bricktown and downtown projects go through design review. Asbestos-cement tear-offs fall under DEQ and EPA NESHAP rules, and pre-1978 homes need EPA lead-safe practices. HOAs in Edmond, north OKC, Norman and Moore often limit colors, materials and masonry percentages.

An Insurance-Driven, Value-Conscious Market

Home values in the metro of roughly 1.4 million people sit below the national median, and most homes are owner-occupied. That makes owners careful about where the money goes. A lot of siding work here is paid for by insurance claims, and repeat spring storms mean many homeowners have filed more than once. Matching is a constant headache. Discontinued vinyl colors and profiles can't be blended, which leads to disputes over whether a whole elevation should be replaced. After big storms, out-of-state crews flood in and then vanish. That's why OKC homeowners tend to look for a local, bonded contractor who will still answer the phone next spring.

Know The Signs

Common Siding Problems in Oklahoma City

Most siding failures we see in the metro come back to the same few causes: hail, wind, heat, moisture and soil movement. Here's what each problem looks like, why it's so common in central Oklahoma, and how urgent it is.

Hail-Cracked and Punctured Siding

Serious

Impact damage from hailstones. It shows up as cracked or holed vinyl, dented aluminum or steel, and chipped or fractured fiber cement. Even small breaks let wind-driven rain reach the sheathing behind the panels.

Why it happens here

Oklahoma City is one of the most hail-prone metros in the country. Stones of 1 to 2+ inches fall almost every spring, mostly from April through June. Older, thin vinyl gets brittle after years of UV and cold winters, so it shatters instead of flexing. Aluminum siding on postwar ranches dents from smaller hail than you'd expect. Because storms come back year after year, a lot of homes carry layers of patched damage. Patching gets harder when the original vinyl color has been discontinued.

Signs to watch for
  • Holes or spiderweb cracks in vinyl panels
  • Round dents in aluminum or steel siding
  • Chipped paint or exposed substrate on fiber cement
  • Hail spatter marks on the north and west walls
  • Matching damage on gutters, screens and AC fins
  • Shattered pieces of panel in flower beds after a storm
Local patterns

We see it most after spring storms in Moore, south OKC, Norman and Edmond. Westmoore and Brookhaven-area homes with early thin vinyl and Midwest City ranches with original aluminum siding take the worst of it.

Our fix

Document the damage for your insurer, replace panels where we can match them, and re-side full elevations when a match isn't available. Impact-resistant fiber cement is a good upgrade.

Wind-Torn Panels, Soffit and Fascia

Emergency

Siding, soffit or fascia ripped loose or blown off by straight-line winds or tornado-related gusts. Sheathing and house wrap are left open to rain, and debris can push through what's left of the wall cladding.

Why it happens here

Severe storms here regularly bring 60–80+ mph straight-line winds, and the 1999 and 2013 tornadoes are still fresh in Moore. Gables on brick ranches catch the most wind. Siding that was face-nailed, nailed too tight, or hung without enough fasteners for the wind rating lets go first. When the nailing hems are already loose from years of heat cycling, panels unzip from the bottom up. Damaged soffit then lets in squirrels and birds, so a storm problem turns into a pest problem.

Signs to watch for
  • Missing panels on gables or upper walls
  • Panels flapping or unlocked at the bottom edge
  • Sagging or detached soffit
  • Fascia pulled away from the roofline
  • Exposed house wrap or bare sheathing
  • Debris lodged in the siding
Local patterns

Common across Moore, south OKC and the open western edges of the metro. Exposed gables on 1970s–90s tract homes in NW and SW OKC and Edmond tend to lose panels first.

Our fix

Board up or tarp open walls right away. Then reinstall siding to the manufacturer's wind-rated fastening schedule and replace damaged soffit and fascia with vented, pest-resistant materials.

Heat-Warped and Buckled Vinyl

Moderate

Vinyl panels that wave, bulge or oil-can because they've overheated or can't expand and contract freely. Sometimes they literally melt from reflected window glare.

Why it happens here

Long stretches of 100°F+ heat followed by ice storms and fast freeze-thaw cycles make vinyl expand and contract over and over. Panels nailed tight to the wall have nowhere to go, so they buckle. Cheap, thin vinyl and dark colors make it worse. Low-E glass on the house next door can focus sunlight onto a wall hot enough to distort panels, which is a common complaint in newer, tightly spaced subdivisions.

Signs to watch for
  • Wavy or rippled panels visible from the street
  • Panels bulging between nails
  • Melted or distorted spots facing a neighbor's windows
  • Gaps at J-channel and corner posts in winter
  • Panels that won't slide when pushed sideways
Local patterns

Mostly seen on west- and south-facing walls in newer Edmond, north OKC and Moore subdivisions where houses sit close together, and on dark vinyl installed in the 2000s.

Our fix

Re-hang panels with proper loose nailing and expansion gaps, or replace them with heavier, heat-tolerant vinyl or fiber cement. Window screens or film can deal with glare sources.

Swollen, Rotting Hardboard and OSB Siding

Serious

Masonite, hardboard and LP Inner-Seal OSB lap siding that soaks up water, swells, delaminates and rots, especially along the bottom drip edge and around nail heads.

Why it happens here

Thousands of homes built in the 1970s–1990s across Edmond, Moore, Norman and NW/SW OKC still have the original hardboard or OSB siding, including class-action-era products. Heavy spring and fall rains, sprinklers hitting the walls, and paint that's chalked away under Oklahoma sun let water in. When the boards swell, they attract woodpeckers and termites. The real damage often stays hidden until the siding comes off and we find rotted sheathing underneath.

Signs to watch for
  • Bottom edges swollen, flared or mushy
  • Waffle-pattern texture showing through paint
  • Soft spots when you press on the board
  • Woodpecker holes or termite trails
  • Paint peeling along the lower courses
  • Fungus or dark staining near grade
Local patterns

Common in Quail Creek, the Lake Hefner/Lakeshore area, older Edmond tracts and Westmoore. Postwar ranches in Bethany and Warr Acres that got Masonite in the 1970s–80s re-sides have it too.

Our fix

Full replacement with fiber cement or LP-style engineered siding. We repair any rotted sheathing we find and add a new water-resistive barrier before installing.

Failed Brick-to-Siding Flashing

Serious

Missing, loose or badly detailed flashing and trim where siding meets brick veneer. It lets wind-driven rain run behind the cladding and into the wall cavity.

Why it happens here

Most OKC homes mix brick with siding on gables, upper stories and accent walls, so there are a lot of these transitions to get wrong. Wind-driven rain from spring storms gets pushed into every gap. Expansive red clay soil shifts the foundation, which moves the brick and siding against each other, cracks mortar and opens the trim joints. Earlier repairs that relied on caulk instead of real flashing usually fail within a few seasons.

Signs to watch for
  • Water stains on interior walls below gables
  • Caulk cracked or pulled away at brick lines
  • Gaps between the siding and the top course of brick
  • Rust or stains running down the brick face
  • Peeling paint on trim boards
  • Musty smell in rooms on exterior walls
Local patterns

Shows up all over the metro's brick ranches, especially in Del City, Midwest City, The Village and Moore. It's most common on homes where hail repairs replaced siding without redoing the flashing.

Our fix

Remove the trim at the transition, install proper Z-flashing, kick-out and head flashing, tie it into the weather barrier, and finish with matched trim.

Seams Pulled Apart by Foundation Movement

Moderate

Siding joints, corners and trim that separate or go out of line as the house settles, leaving gaps, crooked courses and openings at windows and doors.

Why it happens here

Large parts of central Oklahoma sit on expansive red clay that swells in wet springs and shrinks in hot, dry summers. As the foundation moves, it racks the wall framing. Brick veneer cracks in stair-step patterns, and siding seams, corner posts and window trim pull apart. Older homes that have seen decades of these cycles often show the most movement.

Signs to watch for
  • Stair-step cracks in brick next to the siding
  • Lap siding courses that no longer run level
  • Gaps at corner posts and butt joints
  • Window and door trim pulled away
  • Doors that stick seasonally
Local patterns

Common in older Capitol Hill and Del City neighborhoods and in parts of Norman and Moore where clay soils are especially active. It gets worse after a drought summer.

Our fix

Re-set and re-flash the affected siding and trim. If the movement looks structural, we'll tell you plainly and suggest getting a foundation evaluation before re-siding.

Faded, Chalking and Weathered Finishes

Minor

Siding whose color has faded unevenly or left a powdery chalk residue from UV breakdown. Painted wood may also be cracking and peeling. It's often the first sign that a finish is near the end of its life.

Why it happens here

Oklahoma's strong summer sun and high UV wear down older vinyl and paint quickly, mostly on south- and west-facing walls. Steady south winds and dust storms sand finishes down even more. Faded vinyl also makes storm repairs harder, because a new panel won't match a wall that has bleached for 15 years.

Signs to watch for
  • Chalky residue on your hand when you touch the siding
  • One wall noticeably lighter than the others
  • Peeling or cracking paint on wood siding
  • Brittle vinyl that cracks easily
  • Dull, uneven color
Local patterns

Typical on 1990s vinyl across NW OKC and Edmond, and on painted wood lap siding in Mesta Park, Heritage Hills and the Paseo, where historic rules require repair in kind.

Our fix

Cleaning and maintenance for minor chalking. Repaint or refinish fiber cement and wood. Replace badly faded vinyl with UV-stable colors or factory-finished fiber cement.

What We Do

Siding Services for Oklahoma City Homes

Every service below is built around what actually breaks siding here: hail, wind, heat and moisture. Whether you need one cracked panel replaced or a whole-house James Hardie upgrade, we'll match the material and method to your home, your neighborhood's rules and your budget.

Siding Repair

We fix hail holes, wind-torn panels, loose soffit and fascia, failed flashing and isolated rot so a small problem doesn't turn into wall-cavity damage.

Our approach

We pull damaged courses, check the sheathing and house wrap underneath, replace what's needed, and re-hang panels with loose nailing. We source matching profiles and colors or blend in salvaged panels.

In Oklahoma City, OK

Spring storms make repair our most common call. Brick ranches in Del City, Midwest City and Moore often just need one gable or soffit run fixed after a hailstorm, without touching the rest of the house.

Best for

Homes with limited storm damage, a few rotted boards, or loose panels where the rest of the siding is still in good shape and can be matched.

Siding Installation

We install new siding on additions, new builds and fully stripped walls, with a proper water-resistive barrier, flashing and trim from the start.

Our approach

We follow IRC weather-barrier rules and the manufacturer's wind-rated fastening schedule. Every opening gets flashed and taped, and we leave expansion gaps sized for Oklahoma's temperature swings.

In Oklahoma City, OK

Room additions in Edmond and north OKC often have to match existing brick and HOA color rules. Infill projects in Midtown and Uptown 23rd may call for modern panel layouts.

Best for

Additions, garage conversions, new construction and any project where walls are already open down to the sheathing.

Specialty

Siding Replacement

We tear off old, failing or storm-damaged siding and replace it with a system built to handle hail, wind and heat for decades.

Our approach

We do a full tear-off, inspect the sheathing and replace any that's rotted, install new house wrap and flashing, then put on new cladding. Asbestos-cement removal is handled under DEQ/NESHAP requirements, and pre-1978 homes get lead-safe practices.

In Oklahoma City, OK

It's ideal for 1970s–90s hardboard and LP OSB siding in Quail Creek, Westmoore and Norman, for asbestos shingle in Capitol Hill and Warr Acres, and for whole elevations that can't be matched after hail.

Best for

Homes with widespread rot, failed hardboard, brittle old vinyl, asbestos shingle, or insurance-approved full-elevation replacement.

Siding Inspection

We do a free, detailed exterior check that documents storm damage, moisture problems, flashing failures and remaining siding life, with photos.

Our approach

We walk every elevation, look at the gables and soffit, probe suspect boards, check brick transitions and photograph the damage. You get a clear write-up you can use for planning or an insurance claim.

In Oklahoma City, OK

It's best scheduled after April–June storms or before you buy a home. Older homes in Crown Heights and Mesta Park get extra checks for hidden original siding and historic-district concerns.

Best for

Homeowners after a hailstorm, buyers and sellers, landlords, and anyone who sees warping, staining or loose panels.

Siding Maintenance

We do routine upkeep to stretch your siding's life: cleaning, re-securing loose panels, re-caulking trim, and sealing gaps before storm season.

Our approach

That means soft-washing chalk and red dust, re-fastening loose hems, replacing failed sealant at brick lines and penetrations, touching up fiber cement, and clearing soffit vents.

In Oklahoma City, OK

A late-winter checkup before Oklahoma's spring storm season catches loose panels and open seams while they're still cheap to fix. Fall service handles the summer's UV and heat damage.

Best for

Homeowners who want to protect their current siding, rental owners in Norman and Bethany, and anyone with fiber cement that needs periodic touch-up.

Vinyl Siding Installation

We install quality vinyl and insulated vinyl siding that's affordable and low-maintenance, chosen and hung to stand up to OKC heat.

Our approach

We pick heavier-gauge panels and UV-stable colors and nail loosely, centered in the slots, with proper end gaps. Insulated vinyl adds rigidity and some energy savings.

In Oklahoma City, OK

It's popular for gables and upper walls on brick ranches across Moore, Del City and Midwest City. Insulated vinyl helps cut cooling bills during 100°F summers and handles impact better than thin builder-grade vinyl.

Best for

Budget-conscious homeowners, insurance-funded re-sides and rental properties that need dependable, low-maintenance cladding.

Fiber Cement Siding Installation

We install fiber cement lap, panel and shingle siding. It's non-combustible, rot-resistant and much better at shrugging off hail and heat than vinyl.

Our approach

We follow the manufacturer's clearance, gapping and fastening specs, flash every butt joint, use proper cutting dust control, and finish with factory or field-applied paint.

In Oklahoma City, OK

It's a strong pick for Moore and south OKC owners who want storm resilience. It's also a good replacement for wood lap siding in historic districts where the commission may accept a smooth, lap-profile look.

Best for

Homeowners who want long-term durability, impact resistance and a painted-wood look without wood's rot and maintenance.

Specialty

James Hardie Siding Installation

We install James Hardie fiber cement lap, panel, shingle and trim products for a premium finish built to handle Tornado Alley weather.

Our approach

We install to James Hardie's published specs, with proper clearances, flashing, fasteners and trim details, using factory-finished colors where available for better fade resistance.

In Oklahoma City, OK

It's the standard on newer brick-and-Hardie homes in Edmond, Deer Creek and north OKC, and it's often what HOAs require. It's a common upgrade in Nichols Hills and Moore.

Best for

Higher-end homes, HOA communities, and owners focused on curb appeal, resale value and resistance to hail and heat.

Board and Batten Siding Installation

We install vertical board and batten siding in fiber cement, engineered wood or vinyl for a modern farmhouse or rustic Western look.

Our approach

We set the furring and blocking needed for vertical fastening, flash horizontal breaks, space the battens evenly and detail the transitions to brick and lap siding cleanly.

In Oklahoma City, OK

It's popular as a gable accent on brick ranches, on modern farmhouse builds in Edmond and Norman, on infill in Midtown, and on Western-style storefronts near Stockyards City.

Best for

Homeowners updating curb appeal with accent gables, entries or full elevations, and commercial owners going for a rustic or contemporary look.

Simple & Transparent

Our Siding Process, Start to Finish

No surprises and no pressure. Here's how a typical Oklahoma City siding project goes, from the first call to the final walkthrough, including how we handle storm claims and permits.

Free Inspection and Consultation

  • We walk every elevation, gable, soffit and brick transition
  • We photograph hail, wind and moisture damage
  • We probe suspect boards for hidden rot
  • We talk through your goals, budget and HOA or historic rules

After big April–June storms, demand spikes. If your walls are open to the weather, call right away so we can prioritize temporary protection.

Usually within a few days of your call. Faster for active storm damage.

Written Estimate and Material Selection

  • Itemized pricing for repair, partial or full replacement
  • Side-by-side options: vinyl, insulated vinyl, fiber cement, James Hardie, board and batten
  • Color and profile matching review
  • Financing options explained if you want them

If a hail-damaged color is discontinued, we'll explain your matching options clearly so you can talk them over with your insurer.

Typically 1–3 days after the inspection

Insurance, Permits and Approvals

  • We provide damage documentation for your claim and can meet your adjuster on site
  • We check permit requirements with OKC or your suburb's building department
  • We help with historic-district Certificate of Appropriateness or HOA submittals
  • We schedule asbestos testing for older shingle siding if needed

Oklahoma law limits contractors from acting on your behalf with your insurer. You stay in control of your claim, and we give you the facts you need.

From a few days to several weeks, depending on the claim and jurisdiction

Installation

  • We protect landscaping, windows and AC units
  • We tear off old siding, repair sheathing and install the weather barrier
  • We flash openings and brick transitions, then install siding and trim
  • We clean the site every day

We plan around storms and schedule heat-sensitive steps for cooler morning hours during 100°F stretches.

Most homes take 2–7 working days. Larger or historic projects take longer.

Final Walkthrough and Follow-Up

  • We walk the home with you and fix any punch-list items
  • We do a magnetic sweep for nails and a final cleanup
  • We hand off product information and care tips
  • We provide paperwork for your insurer or lender

We're local, so if a spring storm raises questions next year, we're a phone call away.

On completion day, with follow-up as needed
The Oklahoma City Siding Company Difference

Why Oklahoma City Homeowners Choose Us

Local Siding Expertise, Not Storm Chasing

After every major hailstorm, out-of-state crews knock on doors across Moore, Edmond and south OKC, and many are gone before the next season. We work here year-round. We know how a 1950s Del City ranch is framed, what's hiding under aluminum siding in Crown Heights, and which Edmond HOAs want specific Hardie colors. That local knowledge shows up in the details: flashing that handles wind-driven rain, nailing that lets vinyl move in 100°F heat, and material advice that fits your neighborhood.

Bonded and Insured for Your Protection

Oklahoma doesn't have a statewide residential siding license, so vetting a contractor is up to you. We're bonded and insured. If something unexpected happens on your property, you're covered, and you're not left holding the bill for someone else's mistake. We're happy to provide proof of coverage before any work starts, and we suggest you ask every contractor you're considering for the same.

Siding Is Our Specialty

Siding isn't a side gig we picked up after a roofing job. Repair, replacement, inspection, maintenance, and vinyl, fiber cement, James Hardie and board and batten installation are what we do every day. That focus matters at the tricky spots: brick-to-siding transitions, gable returns, soffit vents, window flashing and expansion gaps. Those are the places where most siding failures in Oklahoma City actually start.

Honest Help With Storm Damage Claims

So much siding work here is insurance-funded, so we make the process easier without overstepping. We document hail and wind damage with clear photos and measurements, explain matching problems when colors have been discontinued, and can meet your adjuster to point out what we found. Oklahoma law keeps the claim in your hands, and we respect that. You get accurate facts, not promises about what your insurer will pay.

Transparent, Written Estimates

Every estimate is free, written and itemized: tear-off, sheathing repair, house wrap, siding, trim, soffit, fascia and disposal. If there's a real chance of hidden rot behind old hardboard, we tell you up front and explain how we'll price it, so you don't get a surprise change order halfway through. You'll see good, better and best material options side by side so you can weigh durability against budget.

Flexible Financing Options

A full re-side doesn't always line up with an insurance payout or a convenient time. We offer financing so you can handle failing hardboard, upgrade to impact-resistant fiber cement, or cover a deductible without putting the project off another storm season. We'll walk you through the options during your estimate. No pressure, just choices.

Coverage Across the Metro

We serve homes and businesses within 20 miles of Oklahoma City. That includes Edmond, Moore, Norman, Midwest City, Del City, Bethany, Warr Acres, The Village and the urban core from Bricktown to Uptown and Stockyards City. Being close by means faster inspections after storms, easier scheduling around weather, and a team that can come back quickly if you ever need us.

Trusted Locally

A Local Siding Contractor You Can Verify

Our customers across the metro value clear communication, clean job sites and siding that holds up when the next spring storm comes through. Ask us for local references during your free estimate.

20-Mile
Service Radius Around OKC
9
Specialized Siding Services
$0
Cost for Inspection and Estimate
100%
Bonded and Insured
BondedInsuredFinancing available
Where We Work

Siding Service Areas Around Oklahoma City

We serve homeowners and property owners within about 20 miles of Oklahoma City. That covers historic bungalows in the urban core, postwar ranches near Tinker AFB, and newer brick-and-Hardie homes in the northern and southern suburbs.

Oklahoma City Core and Historic Districts

Downtown Oklahoma CityBricktownUptown Oklahoma CityCapitol HillStockyards City Main StreetOklahoma City

North and West Suburbs

EdmondThe VillageWarr AcresBethany

South and East Suburbs

MooreNormanMidwest CityDel City

We serve properties within a 20-mile radius of Oklahoma City. Not sure if you're in range? Contact us and we'll confirm. Not sure if we cover your area? Call (405) 442-9071.

Transparent Pricing

How Much Does Siding Cost in Oklahoma City?

Siding prices in the OKC metro depend on material, how much wall you're covering, what's hiding under the old siding, and your home's age. Below are the main cost drivers and realistic ranges for common local projects, so you can plan before your free estimate.

Primary Factor

Siding Material

Material makes the biggest difference. Standard vinyl is the most affordable, usually around $5–$9 per square foot installed in this market. Insulated vinyl runs higher. Fiber cement and James Hardie generally fall around $9–$15 per square foot installed, depending on profile and whether you choose factory finish. Board and batten costs more because of the extra labor for vertical framing and batten layout. Impact-resistant materials cost more up front but tend to hold up better against Oklahoma hail.

Primary Factor

Project Size and Scope

Many OKC homes are brick ranches with siding only on the gables, soffit, fascia and an accent wall or two. That makes partial-wall projects much cheaper than a full re-side. A typical full two-story or all-siding home can need 1,500–2,500+ square feet of cladding. Gables, dormers, high walls and lots of windows add labor, trim and flashing time, which raises the per-square-foot price.

Secondary Factor

Tear-Off, Rot and Sheathing Repair

Taking off old siding is usually straightforward. What's underneath isn't always. Homes with 1970s–90s hardboard or LP OSB siding often have rotted sheathing at the bottom courses and around windows. Sheathing replacement is commonly priced per sheet, often around $70–$120 each installed. We flag the risk on your estimate so it's not a surprise.

Secondary Factor

Asbestos and Lead Compliance

Mid-century homes in Capitol Hill, Del City, Midwest City and Warr Acres often have asbestos-cement shingles. Testing and compliant removal under DEQ and EPA NESHAP rules can add roughly $1,500–$5,000+ depending on the square footage. Pre-1978 homes also need lead-safe work practices, which add containment and cleanup time.

Situational Factor

Permits, HOA and Historic Requirements

Permit fees vary between OKC and each suburb. Historic districts like Heritage Hills and Mesta Park may require repairing wood in kind instead of switching to cheaper materials. Edmond and north OKC HOAs may require specific colors or premium products. These rules can shape both material cost and how long the project takes.

Typical projectDetailsEstimated range
Hail repair on a brick ranchReplace damaged vinyl on two gables plus a section of soffit and fascia, single-story home in Del City or Moore$1,200 – $4,500
Full vinyl re-sideAbout 1,800 sq ft of insulated or premium vinyl with new house wrap, 1970s–80s tract home in Norman or NW OKC$12,000 – $22,000
Hardboard to James Hardie replacementAbout 2,000 sq ft tear-off of failed OSB/hardboard, sheathing repairs, fiber cement lap with trim, Edmond or Quail Creek$22,000 – $38,000
Asbestos shingle removal and re-sideCompliant asbestos removal plus new vinyl or fiber cement on a 1950s ranch in Midwest City or Capitol Hill$14,000 – $30,000

Financing is available, so you can spread out the cost of a full re-side, cover an insurance deductible, or upgrade to impact-resistant fiber cement. Ask about options during your free estimate. In a market where hail comes back nearly every spring, durable siding pays you back. You'll file fewer repair claims, have fewer moisture problems behind the walls, and get stronger curb appeal. Insulated siding and new house wrap can also help with Oklahoma's high summer cooling bills.

Schedule a Free Estimate
Questions & Answers

Siding Questions Oklahoma City Homeowners Ask

How much does new siding cost in Oklahoma City?

Most full re-sides in the OKC metro run about $12,000–$22,000 for vinyl and $22,000–$38,000 or more for James Hardie or other fiber cement on an average-size home. Many local homes are brick ranches that only need siding on the gables, soffit and fascia, and those jobs often cost a few thousand dollars. The biggest variables are material, square footage, rotted sheathing behind old hardboard, and asbestos removal on mid-century homes. We give free, itemized written estimates so you know exactly where the money is going before you decide.

How long does a siding replacement take?

Most single-family homes take 2 to 7 working days once materials are on site. A gable-and-trim repair on a brick ranch is often done in one or two days. Bigger homes, James Hardie with lots of trim detail, asbestos removal, or major sheathing repairs can stretch a project to a week or two. In Oklahoma, weather is the wild card. Spring storms and 100°F summer days can shift the schedule, so we plan around forecasts and keep you updated if dates change.

Do I need a permit to replace siding in Oklahoma City?

It depends on the scope and where you live. In Oklahoma City, a straight siding swap may not need a permit, but replacing sheathing or framing, changing window or door openings, or doing commercial work generally does. Edmond, Moore, Norman, Midwest City, Del City, Bethany, Warr Acres and The Village each have their own building departments and rules. Homes in historic districts like Heritage Hills, Mesta Park or Crown Heights need a Certificate of Appropriateness. We check the requirements for your address before any work starts.

Will insurance pay for hail-damaged siding?

Often, yes. Hail and wind damage are usually covered under standard homeowners policies, minus your deductible. Coverage depends on your specific policy. We inspect the siding, photograph and measure the damage, and can meet your adjuster to show what we found. If your siding color or profile is discontinued and can't be matched, we'll explain that clearly so you can raise it with your insurer. Oklahoma law limits contractors from negotiating claims for you, so you stay in control of the claim.

Which siding holds up best to Oklahoma hail and heat?

Fiber cement, including James Hardie, generally handles hail, heat and UV better than standard vinyl. It doesn't warp in 100°F sun, won't rot, and resists impact better than thin builder-grade panels. Insulated vinyl is a solid middle option. It's stiffer and more impact-tolerant than regular vinyl and can lower cooling costs. No siding is hail-proof against 2-inch stones, but choosing tougher materials and installing them correctly cuts down on how often you'll need repairs.

How can I prevent siding damage between storm seasons?

Do a quick walk-around every late winter and again after big storms. Look for loose or cracked panels, gaps at brick transitions, and damaged soffit. Keep sprinklers from spraying the walls, trim shrubs back so they don't rub, and clean off chalk and red dust every year or two. Re-caulk trim joints when the sealant cracks. If a neighbor's low-E windows are reflecting onto your vinyl, a screen or film can stop the warping. A professional maintenance visit before April catches small problems while they're cheap.

When should I repair siding versus replace it?

Repair makes sense when damage is limited to a few panels or one elevation, the rest of the siding is sound, and you can get a reasonable color and profile match. Replacement is usually smarter when hardboard or OSB is swelling and rotting in several spots, vinyl is brittle and faded, damage covers multiple walls, or a discontinued color makes matching impossible. Asbestos shingle is another case where full replacement is common. We'll tell you honestly which option makes sense for your home.

How soon should I act after a hailstorm or windstorm?

If panels are missing or the sheathing is exposed, act right away. Wind-driven rain can soak the wall cavity within hours, so get the openings covered and call us. For cracks and dents without open walls, schedule an inspection within a few weeks. Small holes let water and pests in over time, and most insurance policies have deadlines for reporting storm damage. Be careful with out-of-state crews knocking on doors after a storm. Work with a local, bonded contractor.

Find Us

Serving Oklahoma City, OK & Nearby

3810 N Tulsa Ave c1, Oklahoma City, OK, 73112

Get Driving Directions
Ready When You Are

Get Your Free Siding Estimate in Oklahoma City

Whether hail just hit your gables or your old hardboard is finally giving out, we'll inspect it, explain your options honestly, and give you a clear written price. No pressure.

Request a Free Estimate Call (405) 442-9071
  • Free on-site siding inspection with photo documentation
  • Itemized written estimate with good, better and best material options
  • Bonded and insured crew on your property
  • Storm-damage documentation to support your insurance claim
  • Help with permits, HOA and historic-district requirements
  • Financing available for repairs and full replacements
  • Installation built for Oklahoma hail, wind and 100°F heat

Serving Oklahoma City, Edmond, Moore, Norman, Midwest City, Del City, Bethany, Warr Acres, The Village and the urban core from Bricktown to Stockyards City, all within 20 miles.

Siding torn off by wind or exposed sheathing? Call now. We'll prioritize temporary protection to keep rain out of your walls.

Bonded · Insured

Oklahoma City Siding Company Free estimates across Oklahoma City, OK
Free Estimate Call (405) 442-9071